Connect/Gateway panel guide: EMS Firecell 8000

Equipment required

• A Nimbus Connect or Fixed Gateway device

• 3 core screened data cable

• A Nimbus supplied Kentec Syncro/EMS FireCell panel connector (part no 201-301-02)
  
  

Panel configuration

Set the panels baud rate to 19200 and frame to 8N1.

Wiring

Connect the 10 way IDC connector on the Kentec Syncro/EMS FireCell panel connector to the PC port on the panel.

Using 3 core screened data cable wire to the Nimbus RS232 as follows.