Connect/Gateway panel guide: Fike DuoNet/QuadNet
Overview
Nimbus supports standalone configurations of the Fike QuadNet & DuoNet Fire Alarm control panels.
Equipment required
-
A Nimbus Connect or Fixed Gateway device
-
A Nimbus supplied RS232 Female 'D' Type panel connector (part no 201-305-01)
Panel configuration
Set the panels baud rate to 9600 and frame to 8N1.
Wiring
Connect the Female 'D' connector to the RS232 port on the panel.
Using 3 core screened data cable wire to the Nimbus RS232 as follows.
Panel connector | Nimbus RS232 |
Ground | Ground |
Rx | Tx |
Tx | Rx |