Connect/Gateway panel guide: Honeywell GALAXY

Equipment required

• A Nimbus Connect or Fixed Gateway device

• 3 core screened data cable
  
  

Panel configuration

1. Enter engineer mode

2. Select menu 56

3. Select Internal RS232 communications port:
   1. Mode = Direct
   2. Format = SIA – Level 4
      • Select the event types that you want to output and for which groups PA/Duress
        • Intruder 
        • 24 Hours 
        • Security
        • Custom Zone
        • Fire
        • Set Fault
        • Omit
        • Tamper
        • Setting
        • Reset/Cancel
        • Modules/Comms
        • Elec Status
        • Menu Access
        • Trouble
        • Log Zone
        • Max Tag
        • Zone Restoral
        • RF Supervision
        • Fault
   3. Set an account number (6 digits max)
   4. Communications settings:
      • Baud = 9600
      • Data = 8
      • Parity = None
      • Stop = 1

Wiring

Using 3 core screened data cable wire to the Nimbus RS232 as follows.