Equipment required
From Nimbus
-
A Nimbus Connect or Fixed Gateway device
- A Gent Nano panel connector (part no 201-307-01)
From the panel manufacturer/3rd party
-
3 core screened data cable
-
USB A to USB A cable
Panel configuration
None required.
Wiring
Connect the interface to the panel via USB. The USB to RS232 interface is usually mounted close to the fire panel, on a single gang electrical accessory pattress box. Power to the Interface is usually supplied from the panel.
Using 3 core screened data cable wire to the Nimbus RS232 as follows.
| Panel connector | Nimbus RS232 |
| Gnd | Ground |
| Rx | Tx |
| Tx | Rx |
