Connect/Gateway panel guide: Gent Nano

Equipment required

• A Nimbus Connect or Fixed Gateway device

• 3 core screened data cable

• USB A to USB A cable

• A Nimbus supplied Gent Nano panel connector (part no 201-307-01)
  
  

Panel configuration

None required.

Connections

Connect the interface to the panel via USB. The USB to RS232 interface is usually mounted close to the fire panel, on a single gang electrical accessory pattress box. Power to the Interface is usually supplied from the panel.

Using 3 core screened data cable wire to the Nimbus RS232 as follows.