nimbusGo panel guide: Advanced BMS Interface

Equipment required

From Nimbus

• A nimbusGo device connected to Nimbus Engineer App.
• A 2M Adapter Lead (part no 201-101-01).
• An Advanced MxPro/BMS Panel Adapter (part no 201-105-01).

From the panel manufacturer/3rd party

• n/a

Panel/BMS configuration

1. Ensure the panel is not in commissioning mode.
2. Ensure the BMS Interface test switch is in the off position.

Panel/BMS connections

Connect nimbusGo to the RS232 connections on the interface via the 2m Adapter Lead and Advanced MxPro/BMS Panel Adapter.

You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Engineer.