Equipment required
From Nimbus
- A nimbusGo device connected to Nimbus Engineer App.
- A 2M Adapter Lead (part no 201-101-01).
- An Advanced MxPro/BMS Panel Adapter (part no 201-105-01).
From the panel manufacturer/3rd party
- n/a
Panel configuration
The panel will not output events via the printer port whilst in commissioning mode.
Navigate to Menu > Tools > Print > Setup-Printer and configure as follows.
Panel connections
Connect nimbusGo to the printer port on the panel via the 2m Adapter Lead and Advanced MxPro/BMS Panel Adapter.
Trigger an event to initialise the printer port. You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Engineer.
Learn more: Servicing equipment with Nimbus Engineer
If you are servicing a network with no BMS Interface, you should connect to each node you are testing with the nimbusGo device, as printer output from the network may be unreliable.