nimbusGo panel guide: Kentec Syncro AS/XT+
Equipment required
From Nimbus
- A nimbusGo device connected to Nimbus Digital App.
- A 2M Adapter Lead (part no 201-101-01).
- A Kentec Syncro/Taktis Panel Adapter (part no 201-106-01).
From the panel manufacturer/3rd party
- n/a
Panel configuration
None required.
Panel connection
Connect nimbusGo to the PC port at the front of the panel via the 2m Adapter Lead and Kentec Syncro/Taktis Panel Adapter.
You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Digital App.
Should this not show green after a few seconds, you may need to restart the panel to initialise communication.
Learn more: Conducting a service visit