nimbusGo panel guide: Kentec Taktis
Equipment required
From Nimbus
- A nimbusGo device connected to Nimbus Engineer App.
- A 2M Adapter Lead (part no 201-101-01).
- A Kentec Syncro/Taktis Panel Adapter (part no 201-106-01).
From the panel manufacturer/3rd party
- n/a
Panel configuration
Set the baud rate to 19200.
Panel connection
Connect nimbusGo to the Printer Port via the 2m Adapter Lead and Kentec Syncro/Taktis Panel Adapter.
You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Engineer.
Should this not show green after a few seconds, you may need to restart the panel to initialise communication.
Learn more: Servicing equipment with Nimbus Engineer