nimbusGo panel guide: Siemens Cerberus CS1140

Equipment required

From Nimbus

• A nimbusGo device connected to Nimbus Engineer App.
• A 2M Adapter Lead (part no 201-101-01).
• A Multi Panel (TX, RX, GND) Panel Adapter (part no 201-104-01).

From the panel manufacturer/3rd party

• n/a.

Panel configuration

None required.

Panel connection

Connect nimbusGo to the RS232 card via the 2M Adapter Lead and the Multi Panel (TX, RX, GND) Panel Adapter. You only need to connect the TX and Gnd to the panel.

You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Engineer.