nimbusGo panel guide: Ziton ZP2

Equipment required

From Nimbus

• A nimbusGo device connected to Nimbus Engineer App.
• A 2M Adapter Lead (part no 201-101-01).
• A Multi Panel (9 Pin D Male) Panel Adapter (part no 201-102-01).

From the panel manufacturer/3rd party

• Ziton 2010-2-232-KIT Addressable Fire Panel Accessory – RS232 Kit.

Panel configuration

• Select [Panel Setup]
• Select [Printer Config]
• Select [Ext. Printer]
• Select [Ext. Printer Config]
  • Used enabled
  • ProtMd disabled
  • NWEvents enabled 
  • Alarm enabled
  • Fault enabled 
  • Cond enabled 
  • StatCh enabled 
  • BaudR 19200
    

Panel connection

Connect nimbusGo via the 2m Adapter Lead, Multi Panel (9 Pin Female D) Panel Adapter and Ziton 2010-2-232-KIT Addressable Fire Panel Accessory – RS232 Kit.

You will now see the panel LED on nimbusGo turn green, and "good" panel comms will be indicated in Nimbus Engineer.